Simple test program that can be loaded to make sure that a V0.09 (PCB1) board has been correctly constructed.

Output seen on the AXEPad terminal at 4800 baud should look something like below
cycling indefinitely unless an error is encountered:


Tests starting shortly... 3
Tests starting shortly... 2
Tests starting shortly... 1
LED_HEATCALL...
OUT_HEATCALL...
RTC... seconds=07
RFM22B...
DS18B20... temp=16C
All tests completed OK!


Tests starting shortly... 3
Tests starting shortly... 2
Tests starting shortly... 1
LED_HEATCALL...
OUT_HEATCALL...
RTC... seconds=14
RFM22B...
DS18B20... temp=16C
All tests completed OK!